How to Program a 2010 Ford Ranger Ignition Chip Key Transponder

Step by Step How to Programming Instructions:

Can I program a new key myself if I have no working keys? No, here are your options:
1. Preferred Option: Call a mobile Automotive Locksmith to come to your vehicle to originate a new key. The Locksmith will then have to connect a special computer to your vehicle to program the new key.
2. Tow your vehicle to a Dealership and they will originate a new key. The Dealership will then have to connect a special computer to your vehicle to program the new key.

Can I program a second key myself if I have one working key? Yes, buy/rent a programmer.
1. Use the website below to find an Automotive Locksmith in your area, and then they will have to connect a special computer to your vehicle to program the second key.
2. Go to a Dealership, and they will have to connect a special computer to your vehicle to program the second key.

Can I program a third key myself if I have two working keys? Yes, once you have had the new key cut by a Locksmith, use the following instructions:
1. Insert an existing working key into the ignition cylinder.
2. Turn the ignition cylinder to ON (RUN) and back to OFF.
3. Remove the existing working key and, within five seconds, insert a second working key and turn it to ON (RUN) then back OFF.
4. Remove the second working key and insert the new key before ten seconds have elapsed and turn it to ON (RUN). Leave it on for one second and turn back to OFF.
5. The security light will light up for three seconds to indicate that the new key has been successfully programmed. If you have lost all keys for this vehicle, you will need to find a locksmith to come to your vehicle to originate a new ignition key.