How to Program a 2009 Mitsubishi Raider Ignition Chip Key Transponder

Step by Step How to Programming Instructions:

Ensure you have two previously programmed remote controls inside your vehicle and the new unprogrammed remote control accessible. Make sure your vehicle is turned off before starting. Close all doors and keep them closed throughout the procedure. Perform all steps within 30 seconds of starting the sequence. If you perform any steps out of order, pause for at least one minute before starting again. Read and understand the entire procedure before beginning.

1. Open the center console lid.
2. Place the first programmed remote in the backup slot inside the center console. Without pressing the brake pedal, press and release the push-button ignition switch. Wait a few seconds, then press and release the push-button ignition switch again. Remove the remote control.
3. Within 10 seconds, place a second programmed remote control in the backup slot. Press and release the push-button ignition switch. Wait a few seconds, then press and release the push-button ignition switch again. Keep the ignition on for a few seconds, but no more than 10 seconds. Remove the remote control.
4. Place the unprogrammed remote control in the backup slot and press and release the push-button ignition switch. Programming is now complete.
5. With your foot on the brake pedal, press the push-button ignition switch to verify the remote control functions operate and your vehicle starts with the new remote control.
6. If programming was not successful, wait 10 seconds and repeat Steps 1 through 4.
7. If you have no working key fobs or only one working key fob, you will need to have a locksmith program additional key fobs for you.

If you need to find an automotive locksmith:

1. Locate an automotive locksmith in your area using LocateALocksmith.com.
2. If your vehicle is still mobile, it may save you money to drive to the locksmith instead of having them come to you.
3. The locksmith will then hook up specialized computer equipment to your vehicle in order to program the smart key remote fob.