404 Not Found


nginx
404 Not Found

404 Not Found


nginx
How to Program a 2009 Mercury Sable Ignition Chip Key Transponder - KeyLessCanada : Instructions

Powered By
KeylessCanada.com

PROGRAMMING INSTRUCTIONS:

How to Program a 2009 Mercury Sable Ignition Chip Key Transponder

0
17

How to Program a 2009 Mercury Sable Ignition Chip Key Transponder

Step by Step How to Programming Instructions:

You need to have two previously programmed keys and the new unprogrammed key readily accessible. If you don’t have two previously programmed keys, you will need a locksmith to cut and program a second key, or you can buy/rent a programmer if you have only one working key.

1. Insert the first previously programmed key into the ignition.
2. Switch the ignition from off to on. Keep the ignition on for at least three seconds, but no more than ten seconds.
3. Switch the ignition off and remove the first programmed key from the ignition.
4. After three seconds but within ten seconds of switching the ignition off, insert the second previously programmed key into the ignition.
5. Switch the ignition from off to on. Keep the ignition on for at least three seconds, but no more than ten seconds.
6. Switch the ignition off and remove the second previously programmed key from the ignition.
7. After three seconds but within ten seconds of switching the ignition off and removing the previously programmed key, insert the new unprogrammed key into the ignition.
8. Switch the ignition from off to on. Keep the ignition on for at least six seconds.
9. Remove the newly programmed key from the ignition. If the key has been successfully programmed, it will start the engine and operate the remote entry system (if the new key is an integrated keyhead transmitter). If it was not programmed successfully, wait ten seconds and repeat Steps 1 through 8.

Use these instructions if your Ford Expedition has the smart key system. This vehicle is not onboard programmable. If you have one working smart key, you can Rent a Programmer Here.

1. Locate an automotive locksmith in your area using LocateALocksmith.com.
2. If your vehicle is still mobile, it may save you money by driving to the locksmith instead of having them come to you.
3. The locksmith will then hook up specialized computer equipment to your vehicle in order to program the smart key remote fob.

Leave a reply

X
X