How to Program a 2006 Ford F150 Ignition Chip Key Transponder
Step by Step How to Programming Instructions:
These programming procedures are applicable only for vehicles built in the USA.
Can I program a duplicate key for this vehicle?
Yes, once you have had the new key cut by a locksmith, follow the instructions below:
1. Insert an existing programmed working key into the ignition cylinder.
2. Turn the ignition to the ON position for 5 seconds, then back to the OFF position.
3. Remove the existing key, and within 5 seconds, insert the new key and turn it to the ON position for 5 seconds.
4. Turn the key OFF, then back to ON. The key is now programmed. Start the vehicle to test the key.
Can I program a new key myself if I have no working keys? No, contact a locksmith for programming assistance.
