How to Program a 2000 Toyota Camry Solara Ignition Chip Key Transponder
Step by Step How to Programming Instructions:
1. Ensure you have your master Toyota key (black key) ready.
2. Insert the black programmed key into the ignition.
3. Within 15 seconds of inserting the key, press and release the accelerator pedal five times.
4. Within 20 seconds of completing step 2, press and release the brake pedal six times.
5. Remove the black key from the ignition switch.
6. Within 10 seconds of removing the black key, insert the new unprogrammed key into the ignition.
7. Press and release the accelerator pedal once within 10 seconds of inserting the new key.
8. After completing the above steps correctly, you will see the immobilizer warning lamp start flashing. After one minute, the lamp will stop flashing.
9. Once the immobilizer warning lamp stops flashing, you have 10 seconds to insert an additional key to be programmed.
10. Within 10 seconds of inserting the additional key into the ignition, press and release the accelerator pedal once.
11. The immobilizer warning lamp will flash, and after one minute, it will shut off.
