How to Program a 2009 Toyota Sienna Ignition Chip Key Transponder
Step by Step How to Programming Instructions:
These programming procedures are applicable only for vehicles built in the USA.
Can I program a new key myself if I don’t have any working keys?
No, contact a local locksmith for programming.
Can I create a duplicate key for this vehicle?
Yes, once you have the new key cut by a locksmith, follow these instructions:
1. Insert an existing programmed working key into the ignition cylinder.
2. Turn the ignition to the ON position for 5 seconds, then back to the OFF position.
3. Remove the existing key and within 5 seconds, insert the new key and turn it to the ON position for 5 seconds. 4. Turn the key OFF, then back to ON. The key is now programmed. Start the vehicle to test the key.
