Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2017 Cadillac XTS

Step-by-Step Programming Instructions:

To program a new transmitter when there are two recognized ones, ensure the vehicle is off and all transmitters, old and new, are with you.

1. Remove the vehicle key from a recognized transmitter.
2. Place the recognized transmitters in the cup holder.
3. Remove the key lock cylinder cap and insert the vehicle key into the cylinder on the driver door handle. Turn the key counterclockwise to the unlock position five times within 10 seconds. The Driver Information Center (DIC) will display “READY FOR REMOTE #2, 3, 4, ETC.”
4. Put the new transmitter in the transmitter pocket inside the center console storage area between the driver and front passenger seats.
5. Press the ENGINE START/STOP button. Once the transmitter is learned, the DIC will indicate readiness to program the next transmitter.
6. Remove the transmitter from the pocket and press either unlock or lock. Repeat steps 4–6 for additional transmitters. After all are programmed, hold the ENGINE START/STOP button for about 12 seconds to exit programming mode.

Programming without a recognized transmitter: If no recognized transmitters are available, follow these steps to program up to eight transmitters.

This feature isn’t available in Canada and takes about 30 minutes. The vehicle must be off, and all transmitters to be programmed must be with you.

1. Remove the key lock cylinder cap and insert the vehicle key into the cylinder on the driver door handle. Turn the key counterclockwise to the unlock position five times within 10 seconds. The DIC will display “REMOTE LEARN PENDING, PLEASE WAIT.”
2. Wait 10 minutes until the DIC displays “PRESS ENGINE START BUTTON TO LEARN,” then press the ENGINE START/STOP button. The DIC will again show “REMOTE LEARN PENDING, PLEASE WAIT.”
3. Repeat step 2 two additional times. After the third time, all previously known transmitters won’t work. Remaining ones can be relearned. The DIC should now show “READY FOR REMOTE #1.”
4. Place the new transmitter in the transmitter pocket inside the center console storage area. The storage area must be opened to access the pocket.
5. Press the ENGINE START/STOP button. Once the transmitter is learned, the DIC will indicate readiness to program the next one.
6. Remove the transmitter from the pocket and press either unlock or lock. Repeat steps 4–6 for additional transmitters. After all are programmed, hold the ENGINE START/STOP button for about 12 seconds to exit programming mode.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2017 Cadillac XTS