Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2024 Chevrolet Blazer

Step-by-Step Programming Instructions:

Each vehicle can accommodate up to eight matched transmitters.

Programming with Recognized Transmitters: A new transmitter can be programmed when two recognized transmitters are available. To program, ensure the vehicle is off and have all transmitters, both recognized and new, with you.

1. Place the two recognized transmitters in the front cupholder.
2. Remove the key lock cylinder cap on the driver door handle. Insert the vehicle key of the transmitter into the key lock cylinder on the driver door and turn the key counterclockwise to the unlock position five times within 10 seconds. The DIC will display READY FOR REMOTE #2, 3, 4, etc.
3. Place the new transmitter into the front cupholder.
4. Press ENGINE START/STOP. When the transmitter is learned, the DIC display will indicate readiness to program the next transmitter.
5. Remove the transmitter from the front cupholder and press the transmitter’s Unlock or Lock button. To program additional transmitters, repeat Steps 3–5. When all additional transmitters are programmed, press and hold ENGINE START/STOP for 12 seconds to exit programming mode.
6. Return the key to the transmitter.
7. Replace the key lock cylinder cap. Programming without Recognized Transmitters: If two currently recognized transmitters are unavailable, follow this procedure to program up to eight transmitters. This feature is not available in Canada.

This procedure takes approximately 30 minutes to complete. The vehicle must be off, and all transmitters you wish to program must be with you.

1. Remove the key lock cylinder cap on the driver door handle. Insert the vehicle key of the transmitter into the key lock cylinder on the driver door handle and turn the key counterclockwise to the unlock position five times within 10 seconds. The DIC will display REMOTE LEARN PENDING, PLEASE WAIT.
2. Wait for 10 minutes until the DIC displays PRESS ENGINE START BUTTON TO LEARN and then press ENGINE START/STOP. The DIC display will again show REMOTE LEARN PENDING, PLEASE WAIT.
3. Repeat Step 2 two additional times. After the third time, all previously known transmitters will no longer work with the vehicle. Remaining transmitters can be relearned during the next steps. The DIC display should now show READY FOR REMOTE #1.
4. Place the new transmitter into the front cupholder.
5. Press ENGINE START/STOP. When the transmitter is learned, the DIC display will indicate readiness to program the next transmitter.
6. Remove the transmitter from the cupholder and press the transmitter’s UNLOCK or LOCK button. To program additional transmitters, repeat Steps 4–6. When all additional transmitters are programmed, press and hold ENGINE START/STOP for 12 seconds to exit programming mode.
7. Return the key to the transmitter.
8. Replace the key lock cylinder cap.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2024 Chevrolet Blazer