Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2017 Buick LaCrosse

Step-by-Step Programming Instructions:

Instructions for programming with two programmed remotes:
1. Place both programmed remotes in the cupholder.
2. Remove the key lock cylinder cap on the driver door handle.
3. Insert the vehicle key of the new remote into the key lock cylinder on the outside of the driver door. Turn the key to the unlock position five times within 10 seconds. The Driver Information Center (DIC) displays “READY FOR REMOTE #2, 3, 4, or 5.”
4. Place the new remote into the remote pocket inside the armrest storage area.
5. Press ENGINE START/STOP. When the remote is learned, the DIC will show that it is ready to program the next remote.
6. Remove the transmitter from the remote pocket and press unlock. To program additional remotes, repeat Steps 3–5. When all additional remotes are programmed, press and hold ENGINE START/STOP for 12 seconds to exit programming mode.
7. Put the key back into the remote.

Instructions for programming without two programmed remotes:
1. Remove the key lock cylinder cap on the driver door handle.
2. Insert the vehicle key of the remote into the key lock cylinder on the outside of the driver door. Turn the key to the unlock position five times within 10 seconds. The Driver Information Center (DIC) displays “REMOTE LEARN PENDING, PLEASE WAIT.”
3. Wait for 10 minutes until the DIC displays “PRESS ENGINE START BUTTON TO LEARN,” then press ENGINE START/STOP. The DIC display will again show “REMOTE LEARN PENDING, PLEASE WAIT.”
4. Repeat Step 2 two additional times. After the third time, all previously known remotes will no longer work with the vehicle. Remaining remotes can be relearned during the next steps. The DIC display should now show “READY FOR REMOTE #1.”
5. Place the new remote into the remote pocket inside the armrest storage area.
6. Press ENGINE START/STOP. When the remote is learned, the DIC will show that it is ready to program the next remote.
7. Remove the remote from the remote pocket and press unlock. To program additional remotes, repeat Steps 4–6. When all additional remotes are programmed, press and hold the ENGINE START/STOP button for 12 seconds to exit programming mode.
8. Put the key back into the remote.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2017 Buick LaCrosse