Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2005 Toyota Camry

Step-by-Step Programming Instructions:

1. Begin with the key out of the ignition, the driver’s door open, all other doors closed, and all doors unlocked.
2. Perform the following steps within 5 seconds:
A. Insert the key into the ignition (Do NOT Turn) and then pull the key out.
B. Repeat: Insert the key into the ignition (Do NOT Turn) and then pull the key out.
3. Within 40 seconds, perform the following steps:
A. Close, then open the driver’s door.
B. Close, then open the driver’s door again.
C. Insert the key into the ignition (Do NOT Turn) and then pull the key out.
4. Within 40 seconds, perform the following steps:
A. Close, then open the driver’s door.
B. Close, then open the driver’s door again.
C. Insert the key into the ignition and leave it there.
D. Close the driver’s door.
E. Turn the ignition to ON (Do NOT Start), then back to OFF.
F. Remove the key from the ignition.
5. Within 3 seconds, the power door locks should automatically lock and then unlock, indicating successful entry into programming mode. Return to step 1 if the locks do not cycle at this point.
6. Within 40 seconds, perform the following steps:
A. Simultaneously press the lock and unlock buttons on the remote for 1.5 seconds.
B. Immediately after releasing the lock and unlock buttons, press the lock button by itself and hold for 2 seconds. Within 3 seconds, the door locks should cycle once, indicating successful programming. If the door locks cycle twice, repeat steps A and B in step 6 as the remote was not accepted.
C. Repeat steps A and B in step 6 for each new remote.
7. Open the driver’s door.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2005 Toyota Camry