Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 1999 Chevrolet Venture

Step-by-Step Programming Instructions:

1. Start by removing the key from the ignition.
2. Locate and remove the “BCMPRGRM” fuse from the fuse panel. You can access the fuse panel by opening the front passenger door. Refer to the legend on the fuse panel to find the correct fuse.
3. Close all vehicle doors.
4. Also, close the liftgate.
5. Insert the keys into the ignition and turn the ignition lock cylinder to the ACC position (one click towards you, opposite direction from starting the engine).
6. Turn the ignition lock cylinder to OFF, then back to ACC within one second.
7. Open and close any vehicle door. You’ll hear a chime indicating the system has entered programming mode.
8. Press and hold the transmitter’s LOCK and UNLOCK buttons simultaneously for 14 seconds. Note: After 7 seconds, you might hear a chime confirming successful synchronization. Wait approximately 14 seconds for a second chime, confirming successful programming. Your new remote has been accepted, and all existing remote codes have been erased.
9. Repeat the previous step for each additional transmitter you want to program, including any existing transmitters.
10. Remove the ignition key from the ignition lock cylinder.
11. Finally, reinstall the “BCMPRGRM” fuse back into the fuse panel.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 1999 Chevrolet Venture