Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2007 Infiniti QX56

Step-by-Step Programming Instructions:

1. Begin by closing and locking all doors using the driver’s side power lock/unlock switch.
2. Insert the key into the ignition and remove it from the ignition key cylinder at least six times within 10 seconds. Successful completion of this step will be indicated by your Hazard Lamps flashing. Note: Fully withdraw the key from the ignition cylinder each time. If this process is executed too quickly, the system will not enter programming mode.
3. Insert the key into the ignition cylinder and turn it to the ACC position.
4. Within 5 seconds, press ANY button on the remote transmitter. Your Hazard Lamps should flash. Note: Do not press the button more than once in this step. Pressing the button multiple times will render the programming procedure unsuccessful.
5. If there are additional transmitters (including old ones), unlock and lock all doors using the driver’s side power lock/unlock switch. Within 5 seconds, press ANY button on the next remote. Your Hazard Lamps should flash. Repeat this process for each transmitter, including existing ones.
6. Turn the key to the OFF position, remove the keys from the ignition, unlock the doors using the driver’s side power lock/unlock switch, and open the driver’s side door.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2007 Infiniti QX56