Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 1999 Infiniti G20

Step-by-Step Programming Instructions:

1. Begin by closing and locking all doors using the driver’s side power lock/unlock switch.
2. Insert the key into the ignition and remove it from the ignition key cylinder at least six times within a span of 10 seconds. If done correctly, your Hazard Lamps will flash. Note: Ensure to fully withdraw the key from the ignition cylinder each time. If this process is executed too quickly, the system won’t enter programming mode.
3. Insert the key into the ignition cylinder and turn it to the ACC position.
4. Within 5 seconds, press any button on the remote transmitter. Your Hazard Lamps should flash. Note: Avoid pressing the button more than once in this step. Pressing it multiple times will hinder the programming procedure’s success.
5. If there are any additional transmitters (including the old ones), follow these steps: unlock then lock all doors using the driver’s side power lock/unlock switch, and within 5 seconds, press any button on the next remote transmitter. Your Hazard Lamps should flash. Repeat this step for each transmitter, including any existing ones.
6. Turn the key to the OFF position, remove the keys from the ignition, unlock doors using the driver’s side power lock/unlock switch, and open the driver’s side door.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 1999 Infiniti G20