Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2001 Chevrolet Camaro

Step-by-Step Programming Instructions:

1. Turn the ignition switch to the OFF position.
2. Remove the RADIO fuse.
3. Cycle the ignition switch from the OFF position to the RUN position (as far as possible without cranking the engine) three times within five seconds, ending in the RUN position. The vehicle will enter the programming mode by locking then unlocking the door locks.
4. Press and hold both the LOCK and UNLOCK buttons on the first transmitter for approximately 15 seconds. The vehicle will confirm programming by locking then unlocking the door locks. Your new remote has been accepted and all existing remote codes have been erased.
5. Repeat the previous step for each additional transmitter (including any existing transmitters). You can program up to four transmitters. This must be done before the RADIO fuse is reinstalled.
6. Place the ignition switch in the OFF position.

Important note: The remote keyless entry system will not be operational if the radio fuse is open.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2001 Chevrolet Camaro