Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 1999 Mazda MPV

Step-by-Step Programming Instructions:

1. Remove the key from the ignition.
2. Close all doors.
3. Open the driver’s side door and leave it open.
4. Insert the key into the ignition. Turn the key to the ON position (as far as it will go without starting the engine) and then to the OFF position. Remove the key.
5. Repeat step 4 two more times, ensuring the key is removed each time.
6. Close and then reopen the driver’s door three times.
7. At this point, a buzzing sound or chime should be heard, indicating that the vehicle is now in programming mode. If not, wait for 40 seconds and return to step 1.
8. All transmitters need to be programmed at this time, including the old ones. Press any button on a transmitter twice. A buzzing sound or chime should be heard, indicating that the vehicle has accepted the new transmitter code. Repeat for the next transmitter, up to a total of three remotes (including any old remotes).
9. After all remotes are programmed, wait for 15 seconds or until you hear four chimes, signaling successful programming.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 1999 Mazda MPV