Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2009 Mitsubishi Outlander

Step-by-Step Programming Instructions:

For Outlanders with a regular key or remote head key system:
1. Have your new key cut to match your existing programmed keys.
2. Insert the first previously programmed key into the ignition and turn it to the ON position (do not start the engine) for 5 seconds, then back to the OFF position and remove.
3. Insert the second previously programmed key into the ignition and turn it to the ON position (do not start) until the immobilizer indicator light flashes (within 10 seconds), then back to OFF and remove. If there’s an error while the light is flashing, it will go out; otherwise, it should continue flashing.
4. Within 30 seconds of the flashing light, insert the new unprogrammed key into the ignition and turn it to the ON position (do not start). The immobilizer light should stay solid for about 3 seconds when programming is complete. Then turn it back to OFF and remove. If an error occurs, the immobilizer light will flash 3 times, and you must start over.
5. Your car should now start with the new key.
6. Repeat steps 1 through 5 for each additional new key.

For vehicles with a Smart Key system:
1. This vehicle cannot be programmed onboard and requires a qualified professional locksmith.
2. Find an automotive locksmith in your area.
3. If your vehicle is still mobile, consider driving to the locksmith to save money.
4. The locksmith will use specialized computer equipment to program the ignition smart key.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2009 Mitsubishi Outlander