Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2003 Honda Pilot

Step-by-Step Programming Instructions:

Note: Entering programming mode erases all previously programmed remotes. You must reprogram all remotes you want to work once you have entered the programming mode. You must perform each of the first twelve steps within 5 seconds of each other to enter programming mode. Programming each remote (step 13) must be done within 10 seconds.

1. Ensure the doors are unlocked.
2. Turn the ignition to the ON position (II).
3. Press the LOCK or UNLOCK button on the remote.
4. Turn the ignition to the ACCESSORY (I) or LOCK (0) position.
5. Turn the ignition back to ON (II).
6. Press the LOCK or UNLOCK button on the same remote.
7. Turn the ignition to ACCESSORY (I) or LOCK (0).
8. Turn the ignition back to ON (II).
9. Press the LOCK or UNLOCK button on the same remote.
10. Turn the ignition to ACCESSORY (I) or LOCK (0).
11. Turn the ignition back to ON (II).
12. Press the LOCK or UNLOCK button on the same remote. Make sure the door locks cycle to indicate that the system has entered programming mode.
13. Press the LOCK button on each remote that you want programmed. Make sure the doors cycle each time to indicate that the remote has been accepted. The system will accept up to three remotes.
14. Turn the ignition to LOCK (0) to exit the programming mode.
15. Test the remotes.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2003 Honda Pilot