Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 1998 Pontiac Bonneville

Step-by-Step Programming Instructions:

1. Close all doors.
2. Insert keys into the ignition and leave them in the OFF position.
3. Locate the OBDII Port under the driver’s side dashboard. Note that the port is wider at the top. Your OBDII Port will not have numbers; use this description for reference.
4. Ensure there are metal contact pins in terminals 8 and 4. Connect terminals 8 and 4 with a suitable jumper wire (keep the jumper wire connected throughout the programming procedure). Make sure you identify which terminals are 8 and 4. The vehicle will respond by locking and unlocking the doors to signify entering programming mode.
5. Turn the ignition to the ON position (as far as you can go without cranking the engine). The doors will lock.
6. Press and hold both the LOCK and UNLOCK buttons together on the first remote to be programmed for up to 30 seconds. The vehicle will respond by locking then unlocking the doors. Release the buttons.
7. Within one minute, repeat step 6 for any additional remotes, if any, including existing remotes.
8. Remove the jumper wire from the OBDII Port.
9. Test the remote(s).

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 1998 Pontiac Bonneville