
Description
to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 1998 Isuzu Trooper
Step-by-Step Programming Instructions:
1. Open the driver’s door.
2. Insert the key into the ignition.
3. Turn the ignition switch to the ACC position and then to the LOCK position three times. (Ensure this is done within 3 seconds—speed is crucial, or the system won’t enter the programming mode.)
4. Within 10 seconds, close and open the door two times.
5. Again, turn the ignition switch to the ACC position and then to the LOCK position three times (within 3 seconds).
6. Within 10 seconds, close and open the door.
7. Verify that the power door locks cycle once to confirm that the system is in programming mode.
8. Within 20 seconds, press the LOCK button on the transmitter you are programming.
9. Confirm that the door locks cycle once.
10. Within 20 seconds, press the UNLOCK button on the transmitter.
11. Confirm that the door locks cycle once to indicate that the system has accepted the transmitter’s code.
12. Repeat steps 8 and 9 for each transmitter to be added.
13. Remove the key from the ignition.
to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 1998 Isuzu Trooper