Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 1996 Buick Skylark

Step-by-Step Programming Instructions:

1. Find the programming connector in the LH trunk. You may need to pull back the trim to access it. The connector has black/white wires leading to it and is not connected to anything else.
2. Jump the terminals of the programming connector. Keep the terminals jumped until step 6.
3. The system should now lock and unlock the doors to indicate that programming mode has been entered.
4. Press any button on the keyless remote once. The system should now lock and unlock the doors, confirming successful programming of the keyless remote.
5. Repeat step 4 for an additional remote or another existing keyless remote. Note: Only a maximum of two keyless remotes can be programmed.
6. Remove the jumper wire from the programming connector to exit programming mode.
7. Test the remote(s).

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 1996 Buick Skylark