Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 1993 Infiniti G20

Step-by-Step Programming Instructions:

These programming instructions are intended for G20 1993.5 models and will not function on early 1993 models or 1993.5-1996 G20 models without automatic seatbelts. Only applicable for models equipped with leather seats and a sunroof, and for 1991-1996 G20 Touring models.

1. Open the trunk.
2. Close and lock all doors.
3. Insert and remove the key from the ignition six times within 10 seconds.
4. Manually unlock and lock the driver’s door once to enable “Belting” mode.
5. Push the lock button on the new remote controller once, within 5 seconds of completing step 4.
6. If additional remotes are needed, repeat steps 4 and 5 for each additional remote immediately after programming the first remote. Note: A total of four (4) remotes can be programmed to function on the same vehicle.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 1993 Infiniti G20