Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2012 Ford Transit

Step-by-Step Programming Instructions:

Here are the instructions for programming the key portion of your remote/key combo:

1. Insert a previously programmed key into the ignition.
2. Turn the ignition from the OFF position to the ON position. Keep the ignition in the ON position for at least one second, but no more than 10 seconds.
3. Turn the ignition to the OFF position.
4. Remove the previously programmed key from the ignition.
5. After three seconds but within 10 seconds of removing the previously programmed key, insert the other previously programmed key into the ignition.
6. Turn the ignition from the OFF position to the ON position. Keep the ignition in the ON position for at least one second but not more than 10 seconds.
7. Turn the ignition to the OFF position.
8. Remove the previously programmed key from the ignition.
9. After three seconds but within twenty seconds of removing the previously programmed key, insert the unprogrammed key (new/valet key) into the ignition.
10. Turn the ignition from the OFF position to the ON position. Keep the ignition in the ON position for at least one second, but no more than 10 seconds.
11. Your new, unprogrammed key is now programmed. If the key has been successfully programmed, it will start the vehicle’s engine and the theft indicator light will illuminate for three seconds and then go out. If the key was not successfully programmed, it will not start your vehicle’s engine and the theft indicator light will flash on and off or stay on for more than three seconds. To program additional new unprogrammed key(s), repeat this procedure from Step 1 for each additional key.

To reprogram your remote entry fobs:

1. Ensure the vehicle is electronically unlocked.
2. Put the key in the ignition in the OFF position.
3. Cycle four times rapidly (within six seconds) between the OFF and ON position. Do not start the vehicle. Note: The fourth turn must end in the ON position.
4. Turn the key to the OFF position within 10 seconds.
5. A chime will sound to confirm that the programming mode has been activated.
6. Within 10 seconds, press any button on the remote entry fob. Note: If more than 10 seconds have passed, you will need to start the procedure over again.
7. A chime will sound to confirm that this remote entry fob has been programmed.
8. Repeat Step 6 to program each additional remote entry fob.
9. The programming mode will exit automatically after 10 seconds of inactivity or by turning the ignition ON.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2012 Ford Transit