Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2021 Ford Expedition

Step-by-Step Programming Instructions:

Programming a Spare Flip Key:

Note: You can program a maximum of eight coded keys to your vehicle, all of which can be integrated keyhead transmitters. Ensure you only use integrated keyhead transmitters or standard SecuriLock keys.

1. Ensure you have two previously programmed keys and the new unprogrammed key readily accessible. Contact a locksmith if two previously programmed coded keys are not available.
2. Insert the first previously programmed key into the ignition.
3. Switch the ignition from off to on and keep it on for at least three seconds, but no more than 10 seconds.
4. Switch the ignition off and remove the first key from the ignition.
5. After three seconds but within 10 seconds of switching the ignition off, insert the second previously coded key into the ignition.
6. Switch the ignition from off to on and keep it on for at least three seconds, but no more than 10 seconds.
7. Switch the ignition off and remove the second previously programmed coded key from the ignition.
8. After three seconds but within 10 seconds of switching the ignition off and removing the previously programmed coded key, insert the new unprogrammed key into the ignition.
9. Switch the ignition from off to on and keep it on for at least six seconds.
10. Remove the newly programmed coded key from the ignition.

If the key has been successfully programmed, it will start the engine and operate the remote entry system (if the new key is an integrated keyhead transmitter). If programming was not successful, wait 10 seconds and repeat Steps 1 through 8.

Programming a Spare Intelligent Access Key:

Note: You can program a maximum of four keys to your vehicle.

1. Ensure the ignition is switched off and all doors are closed before beginning the procedure.
2. Have two previously programmed intelligent access keys inside your vehicle and the new unprogrammed intelligent access key readily accessible.
3. Carry out all steps within 30 seconds of starting the sequence. Stop and wait for at least one minute before starting again if you carry out any steps out of sequence.
4. Access the backup slot.
5. Insert the first programmed key into the backup slot.
6. Press the push-button ignition switch.
7. Wait five seconds and then press the push-button ignition switch again.
8. Remove the intelligent access key.
9. Within 10 seconds, place a second programmed intelligent access key in the backup slot and press the push-button ignition switch.
10. Wait five seconds and then press the push-button ignition switch again.
11. Remove the intelligent access key.
12. Wait five seconds, then place the unprogrammed intelligent access key in the backup slot and press the push-button ignition switch.
13. Once complete, the information cluster displays a message confirming the key has been programmed. The direction indicators flash, and the horn sounds.
14. Check that the remote control functions operate, and your vehicle starts with the new intelligent access key. If programming was unsuccessful, wait 10 seconds and repeat steps 1 through 7.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2021 Ford Expedition