Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2003 Ford Focus

Step-by-Step Programming Instructions:

If you find yourself without any working keys, you won’t be able to program a new key yourself. Here’s what you can do:

1. Preferred Option: Call a mobile Automotive Locksmith to come to your vehicle and create a new key. They’ll use a special computer to program the new key.

2. Alternatively, you can have your vehicle towed to a Dealership. They’ll also create a new key and use a special computer to program it.

Now, if you have just one working key, you can’t program a second key yourself either. Here are your options:

1. Preferred Option: Call or visit an Automotive Locksmith, and they’ll connect a special computer to your vehicle to program the second key.

2. You can also go to a Dealership, where they’ll also connect a special computer to your vehicle to program the second key.

However, if you’re fortunate enough to have two working keys, you’re in luck. You can indeed program a third key yourself using these steps:

1. Insert one of the existing working keys into the ignition cylinder.
2. Turn the ignition cylinder to ON (RUN) and then back to OFF.
3. Remove the existing working key and, within five seconds, insert the second working key and turn it to ON (RUN), then back to OFF.
4. Remove the second working key and insert the new key before ten seconds have elapsed. Turn it to ON (RUN) and leave it on for one second before turning it back to OFF.
5. The security light will illuminate for three seconds, indicating that the new key has been successfully programmed.
6. After successful programming, keep the new key in the ignition cylinder for 10 minutes. Do not attempt to start the vehicle or remove the key during this time. If interrupted, you’ll need to restart the entire procedure. This could be a good opportunity for a coffee break!

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2003 Ford Focus