Description

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2010 Chevrolet Malibu

Step-by-Step Programming Instructions:

These programming procedures are specifically designed for vehicles manufactured in the USA. Can I program a new key myself if I don’t have any working keys? Yes, after obtaining the new key cut by a locksmith, follow these steps:

1. Insert the newly cut key into the ignition and turn the key to the ON position for 10 minutes and 30 seconds.
2. Within 45 seconds, turn the key to OFF and then back to the ON position for 10 minutes and 30 seconds.
3. Within 45 seconds, repeat the process of turning the key OFF and then back to the ON position for 10 minutes and 30 seconds.
4. Turn the key OFF, then back ON. The key is now programmed. Start the vehicle to test the key.

Can I program a duplicate key for this vehicle? Yes, after obtaining the new key cut by a locksmith, follow these instructions:

1. Insert an existing programmed working key into the ignition cylinder.
2. Turn the ignition to the ON position for 5 seconds, then back to the OFF position.
3. Remove the existing key, and within 5 seconds, insert the new key and turn it to the ON position for 5 seconds.
4. Turn the key OFF, then back to ON. The key is now programmed. Start the vehicle to test the key.

to purchase Auto Keys, Fobs, Remotes, Shell/Cases & Related products for 2010 Chevrolet Malibu